STEINEL ST 602819 Instrucciones de operaciones descargar pdf (Pagina 8)

15

After the motion detector

has been connected and

fastened to its wall mount,

the system can be switched

on. Two setting options are

available after removing the

decorative ring

2

.

Twilight setting

The desired motion detector

response threshold can be

adjusted continuously from

approx. 2 lux to 2000 lux.

When the adjustment screw

is at the left stop position

1

,

this means daytime opera-

tion of approx. 2000 lux.

When the adjustment screw

is at the right stop position

6

, this means twilight

operation of approx. 2 lux.

(Factory setting is daytime

operation.) The adjustment

screw must be at the left

stop position when setting

the detection zone and for

the functional test in

daylight.

Switch-off delay

(time setting)

The desired period of oper-

ation of the light can be

adjusted continuously from

approx. 10 sec. to a max.

of 15 min. When the adjust-

ment screw is at the left

stop position

1

, this means

the shortest time of approx.

10 sec. When the adjust-

ment screw is at the right

stop position

6

, this means

the longest time of approx.

15 min. (factory setting is at

min.). The shortest time set-

ting is recommended when

adjusting the detection zone

and performing a functional

test.

Assuming an installation

height of 2 m, the maximum

reach of the sensor is 12 m.

Optimum adjustment of the

detection zone is possible

according to needs. The

shrouds

6

provided serve

to cover any desired num-

ber of lens segments and

individually reduce the

reach. Fine adjustment is

also possible by turning the

sensor housing

3

by ± 80°.

The shrouds

6

can be

divided vertically or horizon-

tally along the grooved divi-

sions, or cut with scissors

6

. After removing the deco-

rative ring

2

, the shrouds

are to be suspended on the

upper part of the sensor

lens. The decorative ring

2

is subsequently to be reap-

plied and the shrouds

6

are

fixed firmly in place. False

switching by cars and

pedestrians, etc. is there-

fore ruled out, or risk areas

deliberately monitored.

Function

Reach setting/adjustment

ca. 10 sek.-max. 15 min.

approx. 10 sec - max. 15 min

2 - 2000 lux

14

Lights, alarms, and many

other things triggered by

movement - for your

convenience and safety.

Whether a house door,

garage, patio or carport,

stairs, a storeroom or cellar

are involved, this infrared

motion detector is rapidly

installed and ready for

operation anywhere.

The IS 240 DUO motion

sensor is equipped with two

120° pyro sensors which

detect the invisible heat

emitted by moving objects

(pedestrians, animals etc.).

The heat thus detected is

electronically converted and

switches on connected con-

sumers (e.g. a light). No heat

radiation is detected through

obstacles, such as walls or

glass and no switching

therefore occurs. The two

pyro sensors have a detec-

tion angle of 240° with an

opening angle of 180°.

Area monitored

approx. 200 m

2

Reach max. 12 m

Principle

Important: the safest

motion detection is

obtained when the device is

mounted and aligned later-

ally to the walking direction

and no obstacles (such as

trees and walls, for exam-

ple) obstruct the view.

ca.5m

ca.12m

approx. 5 m max. 12 m

IS240Duo_10spr_neu 24.08.2011 14:31 Uhr Seite 15

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 41 42

Comentarios a estos manuales

Sin comentarios